1. COLUMN REMOVALS

• Create double or triple bay openings for a large machinery access area with no columns.
• Typical opening sizes with column removals are 12m, 16m or 24m

2. CUSTOM TAPERED GUTTERS

• Get all of your stormwater delivered to central points for piping to your collection tank.
• Custom tapered gutter has a sloping base, no water pooling.
• Eliminate the need for trenching and underground pipework to your tank.

3. CANTILEVER CANOPIES

• Extra storage and working space without the interference of columns.
• Shelter your major doorways.
• Roof cover for your apron slab.

4. TRUSSES OR UB RAFTERS

• AUSPAN typically designs our roof structures using open web trusses.
• UB rafters are also an option if preferred.

5. SKYLIGHTS / INSULATION

• Skylights provide natural lighting into a shed.
• Insulation to roof or walls or both is possible.
• Typical shed insulation is 50mm Blanket Insulation which is installed over safety mesh in the roof and/or walls.
• Other insulation options include thicker blanket insulation or even cool-room panel cladding.

1. BOTTOM ROLL SLIDING DOORS

• Smooth rolling Industrial door system.
• All door weight is supported on the bottom via a concrete strip footing.
• Bottom track is installed in replaceable sections for ease of maintenance.

2. TOP HUNG SLIDING DOORS

• Used for openings where a bottom track is an interference.
• Shearing shed loading doors.
• Grain shed doors where a loader bucket needs to scrape across a door opening.

3. STORM LOCKS

• Storm Locks are a unique AUSPAN option for extra security for your shed in serious weather events.
• Bolt sliding doors down to the ground and increase structural locking to the top of doors.

4. PERSONAL ACCESS DOORS

• P/A doors are used in most ‘enclosed sheds’ for simple and easy access to a shed.
• No need to open your big doors every time.
• Sliding doors are mostly locked from the inside so a P/A door is required to successfully access the door locks.

5. ROLLER DOORS

• Perfect for medium sized openings up to say 4.5m(w).
• Can be motorised.
• Can be upgraded to Industrial Roller Shutters.

1. RIDGE VENTS

• Continuous ridge vents are a great ‘fixed’ ventilation option for allowing air to escape through the ridge of a building.
• Allows air change/flow through a building that has inlet ventilation or door openings allowing air to enter the building.
• Size options from 150mm to 900mm.

2. WHIRLY BIRD VENTS

• Whirly birds are a common roof ventilator option.
• Do have moving parts so not recommended from a maintenance point of view.
• Actively ventilate approx. 150m2 of floor area.

3. WALL VENTS

• Required to meet air change requirements in sheds like Chemical Sheds.
• Wall vents act as ‘inlet’ vents for air to enter a building before exiting through the ridge.

4. WALL SHUTTERS

• Custom made wall shutters are mainly utilised in shearing sheds.

5. WINDOWS

• Windows are common where a farm office is being set up inside a shed.
• Allows areas to be opened up for light and air to enter.

1. MEZZANINE FLOORS

• Great way to achieve extra storage.
• Commonly used for parts storage above and office/lunchroom fitout below.
• Auspan can supply complete with staircase and balustrading.
• Forklift access gates in balustrading available.

2. LEAN-TO'S

• Small vehicle/item storage.
• Drive through machinery section off the side of a larger shed.
• Commonly used as office or lunchroom areas.

3. CONCRETE WORKS

• Grain/Fertiliser Walls
• Auger Pits
• Floor Slabs
• Apron Slabs
• Loading Ramps
• Bunding & Drainage Pits

4. CLADDING OPTIONS

• Zincalume or Colour
• Colour ULTRA for Coastal Areas
• 0.42 or 0.48 Base Metal Thickness
• Color or Zincalume flashings
• Trimdeck or Corrugated profile.

5. STEEL SURFACE TREATMENT

• Hot Dip Galvanised (AUSPAN Standard)
• Sand Blast & Paint
• Untreated